Wall-mounted mini recuperator Aspira Ecocomfort 160

Decentralized ventilation and extraction unit Aspira Ecocomfort 160 with efficient heat recovery

Decentralized ventilation and air extraction unit Aspira Ecocomfort 160 with high-efficiency heat recovery. The device operates on the principle of regenerative heat recovery: a ceramic heat exchanger inside the device collects the heat generated by the incoming or outgoing air flow and releases it when the flow direction changes. The fan is driven by a DC brushless motor with a reverse cycle function, which ensures constant air exchange in the room. The air is constantly filtered using a G3 filter, which is installed on the front of the unit and is easily removed for cleaning purposes. The device is controlled by a wall-mounted electronic controller, which can operate in three operating modes: automatic, air intake and air extraction. In addition, the electronic controller can regulate operation depending on the difference between indoor and outdoor temperatures. The controller can control up to 4 ventilation units and adjust the air intake and exhaust speeds.

Advantages:

• Suitable for rooms up to 44 m²;
• Air flow from 38 to 60 m³/h;
• It freshens the air, provides the necessary amount of oxygen, and at the same time removes excess moisture. All this is beneficial for health and well-being;
• Fast and cheaper installation compared to a centralized ventilation system. Several times and more times – lower initial investment. Often the only optimal solution in old buildings;
• Low operating costs. Low noise level;
• Ventilation unit with DC motor.
• The telescopic body is made of impact-resistant PVC.
• Round telescopic Ø 160 mm duct.
• G3 filter.
• Light and humidity sensors.

Technical characteristics:

• 3 operating levels;
• Air flow: 38 / 60 m³/h;
• Power: 2.0 / 4.0;
• Sound level: 28 / 34;
• Controller protection class: IP20;
• Fan protection class: IPX4;
• Operating temperature: -20°C – 50°C;
• Diameter: Ø 160 mm.

Download product manual