Wall-mounted mini recuperator Aspira Ecocomfort 160 RF

Decentralized ventilation and extraction unit Aspira Ecocomfort 160 RF with efficient 90% heat recovery and remote control

The high-quality, energy-efficient mini recuperator Aspira Ecocomfort 160 RF is designed to ventilate a room in an apartment, individual house or small commercial premises. Wall-mounted mini recuperators are usually installed in old or renovated premises where it is not possible to install a central ventilation system. For larger apartments (with several or more rooms), it is recommended to install one or even several mini recuperators for each room.

The Ecocomfort 160 RF system consists of one or more mini recuperators with a highly efficient heat recovery function. The mini recuperators are installed in the external walls of the house, with a thickness of 28 to 53 cm.

The operation of mini recuperators is based on the principle of regenerative heat recovery, using a ceramic heat exchanger inside the device, which uses the air leaving the room to warm the air entering from the outside. The supplied air is filtered by a G3 class filter. The brushless motor with a low energy consumption level (A+ energy consumption class) is controlled by a microprocessor, which, by processing sensor information (humidity, lighting and temperature), as well as commands given by the user via a wireless control panel, determines the most suitable ventilation mode to ensure better comfort in the room. Temperature adjustment is possible only on the control unit. The remote control with clear and innovative graphics allows the user to set various operating parameters in both manual and automatic modes.

Installation option: there is one main, remote-controlled "Master" type heat exchanger, to which (maximum 64) additional "Slave" type devices can be connected.

Advantages:

• Suitable for rooms up to 50 m²;
• Air flow from 28 to 68 m³/h;
• It freshens the air, provides the necessary amount of oxygen, and at the same time removes excess moisture. All this is beneficial for health and well-being;
• Fast and cheaper installation compared to a centralized ventilation system. Several times and more times – lower initial investment. Often the only optimal solution in old buildings;
• Low operating costs. Low noise level;
• There is no need to open windows when ventilating rooms. This saves up to 90% of heat.
• Ventilation unit with DC motor.
• The telescopic body is made of impact-resistant PVC.
• Round telescopic Ø 160 mm duct.
• Ceramic heat exchanger with efficiency >90%.
• G3 filter.
• Light and humidity sensors.

Technical characteristics:

• 3 operating levels;
• Air flow: 15 / 28 / 48 / 68 m³/h;
• Power: 2.0 / 3.8 / 6.6;
• Sound level: 27 / 32 / 38;
• Controller protection class: IP20;
• Fan protection class: IPX4;
• Operating temperature: -20°C – 50°C;
• Diameter: Ø 160 mm.

Download product manual