Multifunction tool Trotec PMTS 01-230 V

Thanks to the TROTEC PMTS 01-230V multifunction tool, you will be able to perform tasks that require precision and care, such as creating models, polishing jewelry, and more. This device is used for drilling wood and metal; milling wood and plastic; cutting wood, plastic, non-ferrous metals, fasteners; sanding small, dry areas; engraving and polishing metal, plastic, glass, ceramics, wood, leather.

A highly flexible shaft is included for comfortable work, reaching hard-to-reach places. Depending on the material to be processed, the nominal speed can be selected from 10,000 min-1 to 35,000 min-1 without interrupting work using the adjustment wheel. Using the included positioning device, the depth setting can be smoothly reduced from 0 mm to 20 mm during milling work. The additional handle allows you to work with both hands and thus safely control the tool.

Technical characteristics:

• Mains connection: 1/N/PE ~ 230 V / 50 Hz;
• Power: 170W;
• Rated idle speed: 10,000-35,000 min^-1;
• Cable length: 1.8 m;
• Protection class: II;
• Sound pressure level: 72 dB(A);
• Sound power level: 83 dB(A);
• Uncertainty K: 3 dB(A);
• Dimensions: (LxWxH): 250x40x60 mm;
• Weight: 0.65 kg.

Advantages:

• Powerful 170 W motor, continuously operating even under load;
• Universal rotary tool for grinding, drilling, cutting, milling, engraving and many other tasks;
• Suitable for use with various materials: wood, metal, plastic, ceramics, glass;
• 85-piece accessory set with universal tool bits;
• 6-level speed selection for work that matches the material;
• Positioning device with depth scale for precise drilling and slot milling;
• Includes a 107 cm ultra-flexible shaft for creating extra-fine ornaments;
• Additional handle for comfortable and safe control of the device;
• Wide operating range thanks to the sturdy 1.8 m rubber cable;
• Ergonomic design for better control and ease of use;
• Metal loop for hanging the device - for uninterrupted operation.

The set includes:

• 1 flexible shaft;
• 1 additional handle;
• 1 handle mounting screw;
• 1 positioner with depth setting function (0-20 mm);
• 1 tightening wrench;
• 1 locking key;
• 1 clamping chuck for cutting/grinding discs;
• 25 cutting discs;
• 25 grinding discs;
• 1 compression terminal (3.2 mm);
• 1 compression terminal (2.3 mm);
• 2 engraving blades with diamond tips;
• 2 sanding belt clamps;
• 5 sanding belts;
• 1 high-speed steel twist drill bit (3 mm);
• 1 high-speed steel twist drill bit (2 mm);
• 8 aluminum oxide grinding heads;
• 1 clamping chuck for polishing accessories;
• 4 polishing accessories;
• 1 grinding stone;
• 1 milling cutter (for grooves);
• 1 milling cutter (ball head);
• 1 stainless steel brush;
• 1 accessory storage box;
• 1 carrying case.

Download product manual