Plug-in room hygrostat Trotec BH 30

Plug-in humidistat The Trotec BH 30 allows you to adjust the humidity level in 1% steps, from 20% to 90%, using connected humidifiers, air coolers or dehumidifiers. The convenient plug adapter automatically switches these devices on or off, ensuring a pleasant climate and saving energy - unnecessary equipment downtime is avoided. If the humidity in the air exceeds or falls below the set limits, plug-in humidistat automatically turns connected humidity control devices on or off, such as a humidifier if the air is too dry and a dehumidifier if the humidity level is too low. This plug-in humidistat ideal for use with devices that do not already have a built-in humidistat function.

Advantages:

• Simple operation and programming;
• Continuous regulation of humidifiers and dehumidifiers to a set humidity value;
• Humidity level adjustment from 20 % to 90 % RH;
• Protection against unnecessary operating time due to automatic device on/off;
• The operating status can be identified by the red or green indicator light;
• Easy-to-read display;
• Reset function for selected settings;
• Space for a backup battery to save selected settings.

Technical information:

• Control range min.: 20% RH;
• Control range max.: 90% RH;
• Accuracy: ±5% RH;
• Protection class: IP30;
• Measurement interval: 10s;
• Resistive load: 16 A / 3,680 VA;
• Inductive load: 9 A / 2,070 VA;
• Connector: CEE 7/3;
• Monochrome LCD display;
• The device is controlled using buttons;
• Plastic housing;
• Insulation: Protection class I;
• Power supply: Battery type 1x 3V, CR2032;
• Power supply: 230V/50Hz;
• Operating environmental conditions – temperature: from 5°C to 35°C;
• Operating environmental conditions – relative humidity: max. 95% RH;
• Storage environmental conditions – temperature: -10°C to +50°C;
• Storage environmental conditions – humidity: max. 80% RH;
• Dimensions: 126x68x76 (mm);
• Weight: 0.165 kg.

Download product manual