Underfloor heating grid Wellmo MAT, 150 W + non-programmable thermostat Feelspot WTH71.36

„"Wellmo MAT" is a high-class underfloor heating grid designed for installation immediately under a layer of ceramic tiles, parquet or plastic covering.

Innovation and convenience

„The Wellmo heating grid is controlled by a floor thermostat with a maximum temperature adjustment limit of +35 ℃. Thanks to the innovative control, temperature adjustment becomes very simple and convenient.

Practical

This heating grid is very practical because it can be cut as needed (most importantly, cut carefully so as not to damage the heating cable). Due to this feature, the grid can be easily adapted to rooms of different sizes.

Very thin

„The Wellmo heating mat is very thin – 3.0-3.8 mm, making installation easier and requiring less floor raising. This is especially relevant in renovated premises, where the floor raising height may be very minimal.

Universal

„Wellmo mesh is universal in use, as it is suitable for installation under many types of floor coverings, such as laminate, tiles, parquet, vinyl flooring, thin concrete floors, marble, etc.

Efficient operation

Due to the small thickness of the Wellmo mesh, heat reaches the surface faster, so you can feel the heating effect in the room faster.

Simple installation

The installation of the grid is simple, requiring no special preparation. All you need to do is remove the protective layer of the double-sided adhesive tape and press it to the base with light hand pressure. After this, the leveling compound is poured or tile adhesive is applied. The most important thing is to follow all the safety instructions in the instructions.

Features:

• Very thin – 3.0 mm (mesh size from 0.5 m2 to 7 m2) – 3.8 mm (mesh size from 8 m2 to 12 m2).
• The length of the cold leads is 3 m.
• The mains voltage is 230 V.
• ETFE/Teflon insulation.
• Multi-core copper conductor.
• Aluminum foil.
• The distance between the conductors is <-> 9 cm.
• Sticky mat.
• Double-sided adhesive tape.
• Corrugated pipes x 2 (2 m each).
• Instructions in Lithuanian.  

Feelspot WTH71.36 is an electromechanical non-programmable thermostat (thermoregulator) designed to control electric underfloor heating devices. 

Electromechanical room thermostat is designed to regulate the temperature of heated floors and rooms. Convenient control - you can set the desired temperature manually. Can be mounted on the wall or under plaster, depending on the interior. The non-flammable plastic surface guarantees the durability of the thermostat. Thermostat Feelspot WTH71.36 - for those looking for quality and simplicity. 

Warranty:

Wellmo Mat meshes – lifetime guarantee;

Thermostats – 2 years.

Download thermostat manual    Download the grid instructions